Dell PowerEdge C8220 Hardware Owner's Manual page 121

Table 2-1. D4 Token Table
Token Setup Option
48AB Flow Control
48AC Flow Control
48AD Flow Control
48AE Terminal Type
48AF VT-UTF8 Combo
Key Support
48B0 VT-UTF8 Combo
Key Support
48B1 Event logging
48B2 Event logging
48B3 NMI on Error
48B4 NMI on Error
48B5 Memory
Operating Voltage
48C0 Frequency Ratio
48C1 Frequency Ratio
48C2 Frequency Ratio
48C3 Frequency Ratio
48C8 QPI Frequency
48C9 QPI Frequency
48CA QPI Frequency
48CB QPI Frequency
(continued)
Description
Selects none as the flow control for console
redirection.
Selects hardware as the flow control for console
redirection.
Selects software as the flow control for console
redirection.
The BIOS console redirection, if enabled, operates in
VTUTF8 emulation model. See also tokens BFh, C0h,
and D7h.
Disables VT-UTF8 Combination Key Support for
ANSI/VT100 terminals.
Enables VT-UTF8 Combination Key Support for
ANSI/VT100 terminals.
Disables BIOS to log system events to BMC, errors
include ECC/PCI/PCIe/HT...etc.
Enables BIOS to log system events to BMC, errors
include ECC/PCI/PCIe/HT...etc.
Disables BIOS to generate NMI when PCIe
uncorrectable errors occur.
Enables BIOS to generate NMI when PCIe
uncorrectable errors occur.
Indicates all DIMMs in the system are operating at
1.25 volts.
Sets frequency multiplier as maximum level.
Downgrades frequency multiplier one level.
Downgrades frequency multiplier two levels.
Downgrades frequency multiplier three levels.
Sets the QPI frequency runs at maximum speed.
Sets the QPI frequency runs at 4.800GT.
Sets the QPI frequency runs at 5.866GT.
Sets the QPI frequency runs at 6.400GT.
Using the System Setup Program
121