Dell PowerEdge C8220 Hardware Owner's Manual page 118

Table 2-1. D4 Token Table
Token Setup Option
4857 WHEA Support
4858 WHEA Support
4859 NIC
Enumeration
485A NIC
Enumeration
485B PCIe Generation Sets the PCI signaling rate at Gen3 8.0 Gigabits
485C PCIe Generation Sets the PCI signaling rate at Gen2 5.0 Gigabits
485D PCIe Generation Sets the PCI signaling rate at Gen1 2.5 Gigabits
485E Reboot on WOL
(ROW)
485F Reboot on WOL
(ROW)
4860 USB PORT with
BMC
4861 USB PORT with
BMC
4870 Force PXE Boot
only
4871 Force PXE Boot
only
118
Using the System Setup Program
(continued)
Description
Disables Windows Hardware Error Architecture.
Enables Windows Hardware Error Architecture.
Sets PXE boot from onboard NIC to Add-on NIC
adapter. (default)
Sets PXE boot from Add-on NIC adapter to onboard
NIC.
bandwidth.
bandwidth.
bandwidth.
Disables ROW. (default)
The ROW repurposes the Wake on LAN (WOL)
signal to reboot the system board when the system is
in S0/S3 state.
Enables ROW.
ROW repurposes the WOL signal to reboot the
system board when the system is in S0/S3 state. When
a WOL packet is received by the NIC, the wake up
signal generated by the NIC shall cause a hardware
reboot of the system board.
Allows you to electrically disable the internal USB port
which contacts to BMC.
Allow the users to electrically enable the internal USB
port which contacts to BMC.
Disables PXE to be the boot device only.
Enables PXE to be the boot device only. The system
retrying to boot from PXE device.