Table 5-1. System Board Jumper Settings
Item
Jumper
4
BIOS recovery
5
Password enable
6
Power button
pass
System Board V1.1 Jumper Settings
Figure 5-2. System Board V1.1 Jumper Settings
7
Table 5-2. System Board Jumper Settings
Item
Jumper
1
Service mode
Setting
(default) The BIOS recovery jumper is disabled.
(default) The password feature is enabled.
(default) The BMC triggers a power button signal.
1
2
6
5
4
Setting
(default) The flash security setting is enabled.
Description
The BIOS recovery jumper enables the
BIOS flash memory special recovery
mode.
The password feature is disabled.
The power button passthrough signal is
triggered.
3
Description
The flash security and NVRAM clear
signal is disabled.
Jumpers and Connectors
227