Installing The Expansion Card Riser - Dell PowerEdge C8220 Hardware Owner's Manual

Figure 3-24. Removing and Installing the Expansion Card Riser
2
1 expansion card riser

Installing the Expansion Card Riser

1 Place the expansion card riser into the front cover. See Figure 3-24.
2 Replace the two screws securing the expansion card riser. See Figure 3-24.
3 If applicable, replace the expansion card or RAID controller card.
See "Installing the Expansion Card" on page 166 or "Installing the RAID
Controller Card" on page 168.
4 Replace the front cover. See "Installing the Front Cover" on page 149.
5 Replace the sled. See "Installing a Sled" on page 144.
1
2
Installing System Components
M3 screws (2)
175