System Board; Removing The System Board - Dell PowerEdge C8220 Hardware Owner's Manual

7 Enter the System Setup program to confirm that the battery is operating
properly. See "Using the System Setup Program" on page 49.
8 Enter the correct time and date in the System Setup program's Time and
Date fields.
9 Exit the System Setup program.

System Board

The following table lists the different types of system boards, including model
numbers, supported in the sled.
System Board
V1.0
V1.1
V1.2
NOTE:
For information about identifying the sled's system board model number,
see "Identifying System Board Model Number" on page 221.

Removing the System Board

CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1 Remove the sled from the enclosure. See "Removing a Sled" on page 143.
2 Remove the front cover. See "Removing the Front Cover" on page 148.
3 Remove the back cover. See "Removing the Back Cover" on page 150.
4 Remove the cooling shroud. See "Removing the Cooling Shroud" on
page 151.
5 Remove the heat sink. See "Removing a Heat Sink" on page 153.
6 Remove the processor. See "Removing a Processor" on page 157.
7 Remove the memory modules. See "Removing Memory Modules" on
page 163.
System Board Model Number
CN0W6W6G (for sled with Intel Xeon E5-2600 series processor)
CN0TND55 (for sled with Intel Xeon E5-2600 series processor)
CN09N44V (for sled with Intel Xeon E5-2600V2 series processor)
Installing System Components
201