Dell PowerEdge C8220 Hardware Owner's Manual page 30

Error Error Message
Code
8016h SATA 4 Device
Not Found
8017h SATA 5 Device
Not Found
8018h Sparing Mode is
not be
Configured!!,
Please check
Memory
Configuration!!
8019h Mirror Mode is
not be
Configured!!,
Please check
Memory
Configuration!!
8020h Supervisor and
User Passwords
have been
cleared
30
About Your System
Response Error Cause
Pause SATA 4 device
not found
Pause SATA 5 device
not found
Pause Memory
Sparing Mode
Failed
Pause Memory Mirror
Mode Failed
Pause Supervisor and
User Passwords
have been
cleared
Corrective Actions
Check if the SATA port 4 is
enabled. See "SATA
Configuration" on page 77.
Install a SATA device to SATA
port 4.
If the problem persists, see
"Getting Help" on page 241.
Check if the SATA port 5 is
enabled. See "SATA
Configuration" on page 77.
Install a SATA device to SATA
port 5.
If the problem persists, see
"Getting Help" on page 241.
Check if the memory
configuration is set to Sparing
mode. See "Memory
Configuration" on page 74.
If the problem persists, see
"Getting Help" on page 241.
Check if the memory
configuration is set to Sparing
mode. See "Memory
Configuration" on page 74.
If the problem persists, see
"Getting Help" on page 241.
Reset password. See "System
Board Jumper Settings" on
page 226 for more
information.
If the problem persists, see
"Getting Help" on page 241.