Configuring The Qos Settings; Media Settings - AudioCodes Mediant 2000 User Manual

3.3.1.5

Configuring the QoS Settings

The 'QoS Settings' page is used for configuring the Quality of Service (QoS) parameters.
This page allows you to assign VLAN priorities (IEEE 802.1p) and Differentiated Services
(DiffServ) for the supported Class of Service (CoS). For a detailed description of the
parameters appearing on this page, refer to ''Networking Parameters''
detailed information on IP QoS using DiffServ, refer to ''IP QoS via Differentiated Services
(DiffServ)'' on page

To configure QoS:
1. Open the 'QoS Settings' page (Configuration tab > Network Settings menu > QoS
Settings page item).
2. Configure the QoS parameters as required.
3. Click the Submit
4. To save the changes to flash memory, refer to ''
3.3.2

Media Settings

The Media Settings
menu contains the following items:

Voice Settings (refer to ''

Fax/Modem/CID Settings (refer to "Configuring the Fax/Modem/CID Settings" on page
64)

RTP/RTCP Settings (refer to ''

IP media Settings (refer to "Configuring the IP Media Settings" on page 66)

General Media Settings (refer to ''

DSP Templates (refer to "Configuring the DSP Templates" on page 67)

Media Security (refer to ''
SIP User's Manual
504 .
button to save your changes.
menu allows you to configure the device's channel parameters. This
Configuring the Voice Settings''
Configuring the RTP/RTCP Settings''
Configuring the General Media Settings''
Configuring Media Security''
62
on page
Saving Configuration'' on page
on page 63 )
on page
on page 68 )
Document #: LTRT-68810
Mediant 2000
223 . For
172 .
65 )
on page 66 )