SIP User's Manual
3
Web-Based Management
The device's Embedded Web Server (Web interface
configuration, accounting, performance, and security) functionality. The Web interface
allows you to remotely configure your device for quick-and-easy deployment, including
uploading of software (*.cmp), configuration (*.ini), and auxiliary files, and resetting the
device. The Web interface provides real-time, online monitoring of the device, including
display of alarms and their severity. In addition, it displays performance statistics of voice
calls and various traffic parameters.
The Web interface provides a user-friendly, graphical user interface (GUI), which can be
accessed using any standard Web browser (e.g., Microsoft™ Internet Explorer). Access to
the Web interface is controlled by various security mechanisms such as login user name
and password, read-write privileges, and limiting access to specific IP addresses.
Notes:
3.1
Getting Acquainted with the Web Interface
This section describes the Web interface with regards to its graphical user interface (GUI)
and basic functionality.
3.1.1
Computer Requirements
To use the device's Web interface, the following is required:
A connection to the Internet network (World Wide Web).
A network connection to the device's Web interface.
One of the following Web browsers:
•
Microsoft™ Internet Explorer™ (version 6.0 or later).
•
Mozilla Firefox
Required minimum screen resolution: 1024 x 768 pixels, or 1280 x 1024 pixels.
Note:
Version 6.0
•
This section includes full parameter descriptions for the Web interface
configuration tables only. For descriptions of individual parameters,
refer to ''Configuration Parameters Reference''
•
The Web interface allows you to configure most of the device's
parameters. Those parameters that are not available in the Web interface
can be configured using the ini
•
Throughout this section, parameters enclosed in square brackets [...]
depict the corresponding
•
Some Web interface pages are Software Upgrade Key dependant. These
pages appear only if the installed Software Upgrade Key supports the
features related to these pages. For viewing your Software Upgrade Key,
refer to ''
Upgrading the Software Upgrade Key''
®
(version 2.5 or later).
Your Web browser must be JavaScript-enabled to access the Web interface.
) provides FCAPS (fault management,
file.
ini
file parameters.
23
3. Web-Based Management
on page
223
.
on page
175
.
March 2010