Configuring Ldap Settings - AudioCodes Mediant 2000 User Manual


To configure the RADIUS parameters:
1. Open the 'RADIUS Parameters' page (Configuration tab > Advanced Applications
menu > RADIUS Parameters
2. Configure the parameters as required.
3. Click the Submit
4. To save the changes to flash memory, refer to ''
3.3.7.3

Configuring LDAP Settings

The 'LDAP Settings' page is used for configuring the Lightweight Directory Access Protocol
(LDAP) parameters. For a description of these parameters, refer to ''Configuration
Parameters Reference''
Based on LDAP Active Directory Queries''

To configure the LDAP parameters:
1. Open the 'LDAP Settings' page (Configuration tab > Advanced Applications menu
> LDAP Settings
The read-only 'LDAP Server Status' field displays one of the following possibilities:
•
"Not Applicable"
•
"Connection Broken"
•
"Connecting"
•
"Connected"
2. Configure the parameters as required.
3. Click the Submit
4. To save the changes to flash memory, refer to ''
SIP User's Manual
page item).
Figure 3-89: RADIUS Parameters Page
button to save your changes.
on page 223 . For a detailed description of LDAP, refer to ''Routing
on page
page item).
Figure 3-90: LDAP Settings Page
button to save your changes.
162
Saving Configuration''
454 .
Saving Configuration''
Document #: LTRT-68810
Mediant 2000
on page 172 .
on page 172 .