Adaptec Raid Features - Scsi Only - Adaptec SCSI RAID 2100S Installation Manual

Adaptec RAID Features – SCSI Only
Adaptec 2100S, 3200S, 3210S, 3400S, and 3410S controllers support
Legacy SCSI drives (including hard disk, tape, CD-ROM,
CD-RW, and Magneto-Optical drives) and jukeboxes.
Active termination.
SAF-TE (SCSI Accessed Fault-Tolerant Enclosure) and SES
(SCSI Enclosure Services) for high-availability LAN (Local
Area Network) servers and storage subsystems.
RAID features are summarized in the table below:
PCI bus width
PCI bus speed
Cache,
standard
Cache, max
capacity
Channels
Devices per
channel
Total devices
Connectors,
internal
Connectors,
external
RAID 0, 1, 5,
0/1, JBOD
RAID 0/5
Hot spare
Hot swap
7
Audible alarm
Battery module
option
1
The Adaptec 3200S and 3400S differ only in that the Adaptec 3400S has a
factory-installed daughter card that provides two additional channels.
2
The Adaptec 2400A supports ATA/66 and ATA/100 hard drives only.
Adaptec Adaptec
2400A 2100S
32-bit 32-bit
33 MHz 33 MHz
32 MB 32 MB
128 MB 128 MB
4 1
2
1 15
4 ATA hard 15 SCSI
drives devices
4 1 high
density
N/A 1 VHDCI
Yes Yes
No Yes
Yes Yes
6
Yes Yes
No Yes
No No
Adaptec
3200S/3400S
64-bit
33 MHz
32 MB
128 MB
2/4
3 3
15
30/60 SCSI
devices
2/4 high
density
5
2/4 VHDCI
Yes
Yes
Yes
Yes
Yes
Yes
Introduction
Adaptec
1
3210S/3410S
64-bit
66 MHz
32/64 MB
256 MB
2/4
3
15
30/60 SCSI
4 4
devices
2 high
density
5
2/4 VHDCI
Yes
Yes
Yes
Yes
Yes
Yes
5
1-5