Management Security - Comtech EF Data Vipersat CDM-570 User Manual

Satellite network modem router
Hide thumbs Also See for Vipersat CDM-570:
Table of Contents

Advertisement

This managing address is automatically updated on a periodic basis for modems
that are newly enabled, incorrectly set, or following VMS changeovers (redun-
dancy switching). The status of the registration process is displayed for this
parameter as follows:
• NOT-DEFINED — modem has booted up, but is unaware of the
• No STDMA Xmit Grant — operator has entered managing address, but
• Sending Registration (n) — modem is receiving burst maps and the
• Registered — modem is registered with the VMS. For VMS v3.6.0 and

Management Security

Management Security is an optional Vipersat feature that provides encryption
on all VMS management messages passed between the VMS and the network
modems. When enabled, the VMS and all of the network modems must utilize a
common Encryption Key that is manually set on each. The key can be entered
either as an ASCII hex string of exactly 64 characters, or as a passphrase
consisting of 5 to 63 characters.
For modems that operate with Management Security, Enable this feature and
enter the Encryption Key that has been defined for the network.
Note: VMS version 3.7.1 or greater is required for Management Security.
NOTE
Caution: During the process of network-wide key distribution and enabling of
C h ap t e r
U s i n g t h e C o m m a n d L in e I n t e r f a c e ( C L I )
3 -
Once the modem is registered, the I command is removed from the
Vipersat Configuration menu.
managing address.
modem (Remote) is not currently receiving burst maps.
number of registration attempts (n) is displayed.
later, the VMS version number is also displayed (as shown in figure 3-6).
encryption, communications may be lost as the STDMA control
messages will be unreadable until all modems in the network are
configured.
It is recommended that each of the Remote units be configured for
Management Security first, and then the Hub units be configured.
This method will reduce the need for on-site personnel during feature
implementation.
V i p e r s a t C o n f i g u r a t io n
3-53

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vipersat cdm-570l

Table of Contents