Switching An Ecm Remote From Scpc To Stdma; Figure B-15 Stdma Page With Entry Channel Mode, Cdm-570/570L - Comtech EF Data Vipersat CDM-570 User Manual

E n t r y C h a n n e l M od e S w i t c h i n g
Note: Refer to the Vipersat SLM-5650A modem manual for Entry Channel
NOTE

Switching an ECM Remote from SCPC to STDMA

Use the following procedure to switch an ECM Remote operating in SCPC
mode back to STDMA mode.
Note: This switch must be performed manually.
NOTE
Click the Remote List menu item on the STDMA page shown in
1.
B-28
configuration setup. The text referenced within is similar between the
CDM-570/L and the SLM-5650A; the UI page appearances may differ,
however.
Figure B-15
STDMA Page with Entry Channel Mode, CDM-570/570L
figure B-15 above to display the STDMA Remote List shown in
figure B-16.
V i p e r s a t C D M - 5 7 0 / 5 7 0 L U s e r G u i d e