Vipersat File Streamer - Comtech EF Data Vipersat CDM-570 User Manual

M e n u D e s c r i p t i o n s
See the section "STDMA/SCPC Automatic Switching" on page 3-31 for more
details on the use of this feature. For additional information, refer to Appendix
B, "Automatic Switching,".

Vipersat File Streamer

Vipersat File Streamer (VFS) is an optional feature that allows rapid file trans-
fers over the satellite network between host PCs that are running the client VFS
application. To activate the Vipersat File Streaming capabilities of the target
CDM-570/570L, toggle this command to Enabled by entering R at the
command prompt.
Once the parameters on the Feature Configuration screen have been set as
desired, return to the Main Menu and enter the V command to display the
Vipersat Configuration screen shown in figure 3-6.
C h ap t e r U s i n g t h e C o m m a n d L in e I n t e r f a c e ( C L I )
3 - 3-7