Table of Contents
Advertisement
If a Chord Variation is four measures long, and you want to
select it all, the Start will be positioned at 1.01.000, and the End
at 5.01.000.
Bottom / Top Note
Use these parameters to set the bottom and top of the keyboard
range to be transposed. If you select the same note as the Bottom
and Top parameters, you can select a single percussive instru-
ment in a Drum or Percussion track. Since in a Drum Kit each
instrument is assigned to a different note of the scale, transpos-
ing a percussive instrument means assigning the part to a differ-
ent instrument.
Execute
Touch this button to execute the operation set in this page.
Track status icon
Status of tracks. Touch this icon to change the status.
Play status. The track can be heard.
Mute status. The track cannot be heard.
Track names
Under the buttons, a label for each track is shown.
Style/Pad Edit: Velocity
In this page you can change the velocity (dynamics) value of
notes in the selected track. An Advanced mode is available,
allowing you to select a velocity curve for the selected range.
This is useful to create fade-ins or fade-outs.
After setting the various parameters, touch Execute.
Note: When an RX Sound is assigned to the track being edited, the
resulting sound may change, since this kind of Sounds is made of
several different layers triggered by different velocity values.
Also, a fade-out may result in the level "jumping" up next to the
zero, since a higher-level layer may be selected by low velocity val-
ues.
Track
(Style only) Use this parameter to select a track.
All
All tracks selected. The velocity for all notes of
the whole selected Chord Variation will be
changed.
Drum...Acc5 Selected track.
Style/Pad Record mode
E / CV (Style Element/Chord Variation)
Use these parameters to select the Style Element (Style only) and
Chord Variation for editing.
Value
Velocity change value (±127).
Start / End Tick
Use these parameters to set the starting and ending points of the
range to be modified.
If a Chord Variation is four measures long, and you want to
select it all, the Start will be positioned at 1.01.000, and the End
at 5.01.000.
Bottom / Top Note
Use these parameters to set the bottom and top of the keyboard
range to be modified. If you select the same note as the Bottom
and Top parameters, you can select a single percussive instru-
ment in a Drum or Percussion track.
Advanced
When this checkbox is checked, the "Intensity", "Curve", "Start
Velocity Value" and "End Velocity Value" parameters can be
edited.
Intensity
(Only available in Advanced mode). Use this parameter to specify
the degree to which the velocity data will be adjusted toward the
curve you specify in "Curve".
0...100%
Intensity value. With a setting of 0 [%], the veloc-
ity will not change. With a setting of 100 [%], the
velocity will be changed the most.
Curve
(Only available in Advanced mode). Use this parameter to select
one of the six curves, and to specify how the velocity will change
over time.
Start Value = 0%, End Value = 100%
Curve 1
127
127
Velocity
Velocity
1
1
Start
End
Start
Value
Value
Value
Curve 4
127
127
Velocity
Velocity
1
1
Start
End
Start
Value
Value
Value
Start / End Vel. Value
(Only available in Advanced mode). Velocity change at the start-
ing and ending ticks of the selected range.
0...100
Velocity change in percentage.
Execute
Touch this button to execute the operation set in this page.
55
Style/Pad Edit: Velocity
Curve 2
Curve 3
127
Velocity
1
End
Start
End
Value
Value
Value
Curve 5
Curve 6
127
Velocity
RANDOM
1
End
Start
End
Value
Value
Value
Advertisement
Table of Contents
