Table of Contents
Advertisement
Effects: Master 2 / Chorus
In this page you can edit the effect assigned to the Master FX 2
effect processor (usually Chorus). See "Effects" on page 243 for
more information.
Sound Edit operating mode
User PCM Samples: User Samples
Pa600 is fitted with a 96MB PCM Sample memory, that allows
you to load Sounds and Drum Kits based on User PCM Samples
in the Pa-Series format. Compressed PCM Samples cannot be
loaded.
You can load all the Samples contained in a *.SET file. In case not
all Samples can fit in memory, just load single Sounds with their
associated Samples.
User PCM Samples are automatically reloaded when turning the
instrument on. As a consequence, loading times will increase
slightly.
In this page, you can see the amount of Samples loaded in mem-
ory, and purge them in case you want to load new Samples, and
the instrument reports there is no more room available.
User PCM Samples Info
Use this area to see detailed information on the User PCM Sam-
ples loaded. General information for the RAM memory is also
available.
Samples
Number of User PCM Samples in memory.
Drum Samples
Number of User Drum Samples in memory.
Multisamples
Number of User Multisamples in memory.
Available Memory
Pa600 comes with 96MB of RAM already installed; this is the
maximum amount of non-compressed User PCM Samples that
can be loaded. This parameter shows the remaining memory for
the User PCM Samples (in Bytes).
Delete PCM Samples
Here you can delete unused PCM Samples from memory.
Delete Non-assigned User PCM Samples
When pressing the Delete button, you can delete all the Samples,
Drum Samples and Multisamples that are not used by any Sound
or Drum Kit. This may happen when you delete Sounds or
Drum Kits, and their Sample remain in memory unused.
133
Effects: Master 2 / Chorus
Advertisement
Table of Contents
