Table of Contents
Advertisement
Rename Favorite
Choose this command from the page menu, and edit the name
of the Favorite Style banks.
The assigned name can be spanned over two lines, by separating
them with the paragraph character (¶). For example, to write
"World Music" on two lines, enter "World¶Music".
In any case, the Pa600 will try to automatically put on two lines
two words separated by two spaces.
Be careful not to write words exceeding the width of the side tabs
of the Style Select window.
Choose the Rename Favorites command.
1.
Touch the
(Text Edit) symbol next to the bank to be
2.
renamed.
Use the virtual keyboard to edit the name.
3.
4.
When done, touch OK to confirm.e
Sound Select window
To open the Sound Select window, touch the Sound area whereas
it appears in the display, or the SOUND button in the SELEC-
TION section of the control panel.
Press EXIT to exit from this page and go back to the previous
page without choosing any Sound.
Sound sets
Side tabs (banks)
If more than five pages are
Lower tabs (pages)
available, the Previous/Next
tabs are shown in this area
Sound sets
Selected set of Sounds. Factory Sounds are the Sounds supplied
as standard. Legacy Sounds are Sounds compatible with older
Pa-Series models. GM are Drum Kits mapped according to the
General MIDI 2 or XG standards. User Sounds are custom-cre-
ated or edited Sounds.
Side tabs (banks)
Use these tabs to select a bank of Sounds.
Lower tabs (pages)
Use these tabs to select one of the available pages in the selected
bank.
Previous/Next tabs
Scroll the lower tabs to the left or the right, when additional tabs
are available but cannot be seen in the display.
Sounds
Touch one of these buttons in the display to select a Sound.
Unless the "Display Hold" parameter (see page 140) is turned
on, the window automatically closes shortly after you select a
Sound.
Program Change
Program Change number. Shown only when the "Show" param-
eter is turned on in Global mode. (See page 140).
Sound Select page menu
Touch the page menu icon to open the menu. Touch a command
to select it. Touch anywhere in the display to close the menu
without selecting a command.
The commands are the same seen for the Style Select window's
page menu, apart for a difference with the Delete command.
Delete
When deleting a Sound based on User PCM Samples, you are
asked if you want to delete the Samples and Multisamples. Con-
firm deletion only if you don't plan to reuse the same Samples
and Multisamples for some other new User Sounds. Choosing to
delete them frees PCM Sample memory for other data.
Hint: In case you need more free PCM Sample memory, and you
know there are unused Samples and Multisamples in memory, use
the "Delete Non-assigned User PCM Samples" command in the
Sounds
Sound > User PCM Sample page to clean memory (see page 133).
Selecting elements
7
Sound Select window
Advertisement
Table of Contents
