Korg TRITON taktile Parameter Manual: Appendix; Troubleshooting; The Power Will Not Turn On; There Is No Response From The Software

Usb controller keyboard/synthesizer.
Hide thumbs

Advertisement

Troubleshooting
The power will not turn on.
→ If you connect the taktile/TRITON taktile to your computer via a USB hub, it may not power on
due to insufficient power. In that case, you should directly connect the taktile/TRITON taktile to
the USB connector on your computer without using a USB hub.
→ Possibly there is a problem with the USB cable currently used. Please check if you are able to
turn it on using the supplied USB cable.
There is no response from the software.
→ Please check that the taktile/TRITON taktile is correctly set in the MIDI port setup of your appli-
cation.
→ Your application may not support some functions. To check this, please refer to the instruction
manual of your application.
→ To use the functions of the taktile/TRITON taktile, you need to set up your application. To set it
up, please refer to the Setting Guide in the taktile/TRITON taktile instruction manual and the in-
struction manual of your application.
Sometimes it is not recognized as a USB device.
→ Possibly there is a problem with the USB cable currently used. Please replace the cable and
make a retry.
→ Please check whether there is any problem with the USB A connector on the destination PC or
Mac.
→ It is possible that long USB cables are not recognized. Please use the supplied USB cable. A
long USB cable might be recognized if it is connected via a powered hub. Even in this case,
please connect this device and the powered hub using the supplied USB cable.
Buttons do not function as indicated on the taktile/TRITON taktile.
→ Your application may not support some functions, or the functions may be different.
→ Please check if the Torget DAW in the scene parameters conform to your application.
The velocity of the keyboard or the trigger pad has no effect.
→ Please check the velocity curve setup for the keyboard or the trigger pad.
The arpeggiator will not function.
→ Please check whether the MIDI Clock Source is set up correctly.
→ Please check that the Arpeggiator Enable settings for the keyboard, the touch scale and the
trigger pad are set up correctly.

Appendix

18

Advertisement

   Related Manuals for Korg TRITON taktile

Comments to this Manuals

Symbols: 0
Latest comments: