Table of Contents
Advertisement
Global mode
152
MIDI: Filters
MIDI: Filters
Use this page to set up to 8 filters for the MIDI data received or
sent by the Pa600 on the MIDI and USB Device ports. All these
parameters can be saved into a MIDI Preset.
Midi In Filters
Selected MIDI IN filters. Filters are applied to all MIDI channels
at the same time.
Off
No filter.
Pitch Bend
Pitch Bend.
MonoTouch
Mono (or Channel) After Touch.
PolyTouch
Poly After Touch.
PrgChange
Program Change.
SysExcl
System Exclusive.
All CC
All Control Change messages.
0...127
Control Change message #0...127. See "MIDI
Data" on page 316 for a list of available Control
Change messages.
Notes
Note events.
Midi Out Filters
Selected MIDI OUT filters. See above for information on each
filter type.
Audio & EQ: MP3 / Speakers
This page lets you define various parameters for the MP3 player
and the speakers.
MP3 Player
Volume
Use this parameter to set the maximum volume of the MP3
Player. This control lets you balance MP3 files against SMF
Songs and Styles.
0...100
Max volume in percentage.
Speakers
Speakers On/Off
Use this checkbox to turn the integrated speakers on or off.
Audio & EQ: Limiter
The Limiter allows for an increased loudness of the MIDI tracks
(Styles and Songs), by compressing the signal exceeding a
defined threshold. MP3 files are not affected by the Limiter
(since they are usually already "produced", and do not need to
pass through the Limiter again).
All these parameters can be saved into a Limiter Preset,
Limiter Preset
Use this pop-up menu to choose one of the available Limiter
Presets, and automatically reconfigure the EQ parameters.
On/Off
This is the on/off switch for the Limiter section.
Advertisement
Table of Contents
