When installation is completed, eject the virtual drive, and
6.
connect the DEVICE USB port of your Pa600 to one of the
USB ports of your Mac by using a standard USB cable.
Driver's ports
After installation, the following ports will be shown in you MIDI
application (e.g., sequencer) among the other MIDI devices:
Pa600 KEYBOARD: This allows for reception of MIDI messages
from Pa600 (keyboard and controller's data) to the MIDI appli-
cation running on the Mac.
Pa600 SOUND: This allows for transmission of MIDI messages
from the MIDI application running on the Mac, to the internal
tone generator of Pa600.
Installing the Korg USB MIDI Driver
Mac OS X: Installing the KORG USB-MIDI Driver
315