Table of Contents
Advertisement
Global mode
154
Touch Panel Calibration
Touch Panel Calibration
From time to time (for example, after loading a new operating
system), calibrating your Color TouchView™ display may be nec-
essary to make pointing more precise. If so, use this page.
When in this page, first touch exactly inside the set of
1.
arrows in the upper left corner of the display.
The arrows will subsequently move to the other corners of
2.
the display. Touch exactly inside them.
3.
Finally, touch Save to confirm the new calibration.
•
In case you want to exit and cancel the calibration, press
EXIT before completing the procedure.
Hint: To quickly reach this page from any other page, keep the
GLOBAL button pressed until this page appears.
Page menu
Touch the page menu icon to open the menu. Touch a command
to select it. Touch anywhere in the display to close the menu
without selecting a command.
Note: In each Global page, the only available Write Global options
from the page menu are the ones relevant to the content of the cur-
rent page. All other Write Global options are greyed out.
Write Quarter Tone SC Preset
Choose this command to open the Write SC Preset dialog box,
and save the current scale settings in one of the four available SC
Presets.
See "Write Quarter Tone SC Preset dialog box" on page 155 for
more information.
Write Midi Preset
Select this command to open the Write Midi Preset dialog box,
and save the current MIDI settings into one of the available
MIDI Presets.
See "Write Midi Preset dialog box" on page 155 for more infor-
mation.
Write Limiter Preset
Choose this command to save the Limiter settings to one of the
available Limiter Presets.
See "Write Limiter Preset dialog box" on page 155 for more
information.
Write Master EQ Preset
Choose this command to save the Master EQ settings to one of
the available Master EQ Presets.
See "Write Limiter Preset dialog box" on page 155 for more
information.
Advertisement
Table of Contents
