Maintenance - AMT Datasouth Fastmark M7 Series User Manual

6. Maintenance

This session presents the clean tools and methods to maintain your printer.
1. Please use one of following material to clean the printer.
Cotton swab (Head cleaner
Lint-free cloth
Vacuum / Blower brush
100% ethanol
2. The cleaning process is described as following
Printer
1. Always turn off the printer before
cleaning the print head.
2. Allow the print head to cool for a
minimum of one minute.
3. Use a cotton swab (Head cleaner
pen) and 100% ethanol to clean
the print head surface.
Print
Head
1. Turn the power off.
2. Rotate the platen roller and wipe it
Platen
thoroughly with 100% ethanol and a
Roller
cotton swab, or lint-free cloth.
Use the lint-free cloth with 100%
Tear Bar
ethanol to wipe it.
/Peel Bar
Compressed air or vacuum
Sensor
Wipe it with water-dampened cloth
Exterior
pen)
Method
Page 71 of 73
Interval
Clean the print head when changing
a new label roll
Clean the platen roller when
Changing a new label roll
As needed
Monthly
As needed