AMT Datasouth Fastmark M7 Series User Manual page 38

3.1.1.6 Reference X & Reference Y:
Print Setup 9/12
Shift Y
Reference X
> Reference Y
This option is used to set the origin of printer coordinate system horizontally and
vertically. Press the
and press the
button to set the value into printer. Press
return to the previous menu. The default value is 000.
Note: If printing from enclosed software/driver, the software/driver will send
out the REFERENCE command, which will overwrite the setting set from
the front panel.
3.1.1.7 Code Page:
Print Setup 10/12
Reference X
Reference Y
> Code Page
Use this option to set the code page of international character set. For more
information about code page, please to refer the programming manual.
When enter the code page list, the code page in the right side of ">" icon is the
printer current setting.
Press the
button to enable the setting. Press
the previous menu.
Note: If printing from enclosed software/driver, the software/driver will send
out the command, which will overwrite the setting set from the front
panel.
code page
name
USA
BRI
GER
FRE
DAN
ITA
SPA
SWE
SWI
Reference Y
000
button to move the cursor from left digit to right digit,
button to set the value from "0" to "9". Press the
Code Page
> 850
852
860
and to select the code page, and press the
7-bit
code page
International
number
Character Set
USA 437
British 850
German 852
French 860
Danish 863
Italian 865
Spanish
Swedish
Swiss
Page 38 of 73
key to cancel the setting and
11/41
key to cancel the setting and return to
8-bit
International
Character Set
United States
Multilingual
Slavic
Portuguese
Canadian/French
Nordic