AMT Datasouth Fastmark M7 Series User Manual page 45

B. Bline Mode
Calibration 2/4
Gap Mode
> Bline Mode
Cont. Mode
Press the and
button to enter the black-mark sensor calibration mode.
B-1 Automatic
When enter the [Automatic] option, you will see following message and printer
will feed the black mark label to calibrate the sensor sensitivity automatically.
When calibration process is completed, the LCD screen will return to the
previous menu.
Bline Mode
Automatic
In case "Automatic" sensor calibration cannot apply to the media, please use
"Manual" function to calibrate the bline sensor manually.
Bline Mode
Automatic
> Manual
Pre-Printed
When enter [Manual] option, you will see following message. Please complete
there steps
Paper Len.
00151 dot
Bline Size
0024 dot
Bline Mode 1/4
> Automatic
Manual
Pre-Printed
buttons to scroll the cursor to the sensor type. Press the
B-2 Manual
2/4
1. Press the
From left digit to right digit, and press the
button to set the value from "0" to "9" and the "dot/
mm/ inch". Press the
paper length into the printer.
2. Press the
From left digit to right digit, and press the
button to set the value from "0" to "9" and the "dot/
mm/ inch". Press the
bline size into the printer.
Page 45 of 73
button to move the cursor
button to set the
button to move the cursor
button to set the