AMT Datasouth Fastmark M7 Series User Manual page 36

The following 2 figures are the printouts of DIRECTION 0 and 1 for your reference.
DIRECTION 0
Note: If printing from enclosed software/driver, the software/driver will send
out the command, which will overwrite the setting set from the front
panel.
3.1.1.4 Print Mode: (None/Batch Mode/Peeler Mode/Cutter Mode/Cutter Batch)
Print Setup
Density
Direction
> Print Mode
This option is used to set the print mode. Printer default setting is Batch Mode.
When enter this list, the print mode in the right side of " >" icon is the printer current
setting. Press
button to enable the setting. Press
return to the previous menu.
Printer Mode
None
Batch Mode
Peeler Mode
Cutter Mode
4/12
Print Mode
> Batch Mode
Peeler Mode
Cutter Mode
and to select the different print mode and press
Next label top of form is aligned to the print head b
location. (Tear Off Mode)
Once image is printed completely, label gap/black mark
will be fed to the tear plate location for tear away.
Enable the label peel off mode.
Enable the label cutter mode.
Page 36 of 73
DIRECTION 1
2/6
key to cancel the setting and
Description