AMT Datasouth Fastmark M7 Series User Manual page 43

Gap Size
0024 dot
Gap Mode
Scan Backing
Intensity
Ref. Level
Gap Mode
Scan Paper
Intensity
Ref. Level
Gap Mode
Complete
Intensity
Ref. Level
A-3 Pre-Printed
This function can set the paper length and gap size before auto-calibrate the sensor
sensitivity. It can to get the sensor sensitivity accurately.
2. Press the
the cursor from left digit to right digit,
and press the
value from "0" to "9" and the "dot/ mm/ inch".
Press the
size into the printer.
3. Open the print head mechanism, put the
Label backing (liner) under the media sensor.
Press the
into the printer.
xxx
4. Then, Put the label with liner under the
Media sensor. Press the
to set the value into the printer.
xxx
5. The gap sensor calibration is complete.
Press the
will return to the previous menu.
xxx
Page 43 of 73
button to move
button to set the
button to set the gap
button to set the value
Media sensor
Label backing
(liner)
Media sensor
Label with liner
button the LCD screen
button