AMT Datasouth Fastmark M7 Series User Manual page 48

C. Cont. Mode
Calibration 3/4
Bline Mode
> Cont. Mode
Exit
Press the and
button to enter the black-mark sensor calibration mode.
C-1 Automatic
When enter the [Automatic] option, you will see following message and printer
will calibrate the sensor sensitivity automatically. When calibration process is
completed, the LCD screen will return to the previous menu.
Cont. Mode
Automatic
In case "Automatic" sensor calibration cannot apply to the media, please use
"Manual" function to calibrate the sensor manually.
Cont. Mode
Automatic
> Manual
Exit
When enter [Manual] option, you will see following message. Please complete
there steps
Cont. Mode
Remove Label
Intensity
Ref. Level
Cont. Mode
Scan Paper
Intensity
Ref. Level
Cont. Mode 1/3
> Automatic
Manual
Exit
buttons to scroll the cursor to the sensor type. Press the
C-2 Manual
2/3
1. Remove the continuous label. Press the
printer.
xxx
2. Then, put the continuous label under the
Media sensor. Press the
set the value into the printer.
xxx
Page 48 of 73
button to set the value into the
button to