Aborting A Connection Request; Figure 1.15 Connection Request Timeout Example; Table 1.27 Abort Connection Responses - Fujitsu MBA3073RC SERIES Technical Manual

1.5.5.5

Aborting a connection request

BREAK may be used to abort a connection request. The source phy shall transmit
a BREAK after the Open Timeout timer expires or if it chooses to abort its
request for any other reason.
After transmitting BREAK, the source phy shall initialize a Break Timeout timer
to 1 ms and start the Break Timeout timer. Table 1.27 lists the responses to a
BREAK being transmitted before a connection response has been received.
Response
BREAK
Break Timeout
timer expires
Figure 1.15 shows the sequence for a connection request where the Open Timeout
timer expires.

Figure 1.15 Connection request timeout example

C141-C013

Table 1.27 Abort connection responses

This confirms that the connection request has been aborted.
The originating phy shall assume the connection request has
been aborted.
1.5 Address frames
Description
69