Table of Contents
Advertisement
CONVENTIONS USED IN THIS MANUAL
The model names of the disk drives covered by this manual differ depending
on their device types and capacity (*1).
Hard Disk Drive (HDD), "drive" or "device" in this manual.
Note: Model Name
M BA 3 147 RC
Decimal numbers are represented normally.
Hexadecimal numbers are represented as shown in the following examples:
X'17B9', 17B9h, 17B9
Binary number is represented as "010", 010b.
An X is used to represent mode parameters that are ignored by the MODE
SELECT and MODE SELECT EXTENDED commands. An X is also used
to represent mode parameters reported by the MODE SELECT and MODE
SELECT EXTENDED commands and that vary depending on conditions at
the time.
C141-C013
In addition, these disk drives are called
Interface type
Formatted capacity [One gigabyte (GB) = one billion
bytes; accessible capacity will be less
and actual capacity depends on the
operating environment and
formatting.]
Disk size
3: 3.5 inch
2: 2.5 inch
Type
BA: 3.5-inch, 15,000rpm
BB: 2.5-inch, 10,025rpm
BC: 2.5-inch, 15,000rpm
, or 17B9H.
H
Preface
3
Advertisement
Table of Contents
