Table 5.16 Mrie - Fujitsu MBA3073RC SERIES Technical Manual

Disk drives serial attached scsi interface specifications
Hide thumbs Also See for MBA3073RC SERIES:
Table of Contents

Advertisement

Parameter Data Format
MRIE
X'00'
No reporting of informational exception conditions:
This method instructs the target to not report informational exception
conditions.
X'01'
Asynchronous event reporting:
This method instructs the target to report informational exception conditions
by using the rules for asynchronous event reporting as described in the SCSI-
3 Architecture Model and the relevant Protocol Standard.
(setting
The sense key shall be set to RECOVERED ERROR and the additional
prohibited)
sense code shall indicate the cause of the informational exception condition.
X'02'
Generate unit attention:
This method instructs the target to report informational exception conditions
by returning a CHECK CONDITION status on any command. The sense
key shall be set to UNIT ATTENTION and the additional sense code shall
indicate the cause of the informational exception condition.
The command that has the CHECK CONDITION shall not be executed
before the informational exception condition is reported.
X'03'
Conditionally generate recovered error:
This method instructs the target to report informational exception conditions,
dependent on the value of the per bit of the error recovery parameters mode
page, by returning a CHECK CONDITION status on any command. The
sense key shall be set to RECOVERED ERROR and the additional sense
code shall indicate the cause of the informational exception condition.
The command that has the CHECK CONDITION shall complete without
error before any informational exception condition may be reported.
X'04'
Unconditionally generate recovered error:
This method instructs the target to report informational exception conditions,
regardless of the value of the per bit of the error recovery parameters mode
page, by returning a CHECK CONDITION status on any command.. The
sense key shall be set to RECOVERED ERROR and the additional sense
code shall indicate the cause of the informational exception condition.
The command that has the CHECK CONDITION shall complete without
error before any informational exception condition may be reported.
320

Table 5.16 MRIE (1/2)

Descriptor
C141-C013

Advertisement

Table of Contents
loading

Table of Contents