Calibration Values (Specific For This Unit Only) - Magni MCP-601 Operator's Manual

MCP-601 Operator's Manual

Calibration Values (specific for this unit only)

The factory calibration values printout sheet is attached on the following page(s).
These values (cal constants) are unique to this particular unit. If for some reasons that your unit has
gone out of calibration or becomes corrupted, you can restore the unit to its operational condition by
entering these values with the supplied IR remote controller.
For detail instruction on entering Calibration Constant, refer to Section 6. IR Remote Controller,
subsection CAL (Calibration) On-Screen Display.
Magni Systems, Inc. 90