Magni MCP-601 Operator's Manual page 56

MCP-601 Operator's Manual
5060 Graphics
DVI
RGB Black Level
RGB Contrast
RGB Brightness
VGA
RGB Black Level
RGB Contrast
RGB Brightness
System VCO
System VCO (frequency)
Key
Offset
Print All Cal Consts (Calibration Constants)
Store All Constants*
* CAUTION: Do not store changed calibration values by initiating "Store All Constants" unless
you are sure that every change is correct.
The unit can be reset to factory calibration values on PowerUp IF AND ONLY IF the "Store All
Constants" has not been initiated. Once it is initiated, the only way to restore to factory
calibration is to re-enter all changed constants one at a time.
A factory Cal Value Data sheet is included for this specific unit is included at the end of this
Operator's Manual.
Magni Systems, Inc. 56