Saving And Recalling Memories Setting -- Magni Premier Config. Tab; Saving Powerup Settings -- Magni Premier Config. Tab - Magni MCP-601 Operator's Manual

MCP-601 Operator's Manual
The Key Lockout box allows setting the Key lockout areas (100% video pass through) in all four
sides within the output video. The center area denotes the key enable area. Its four sides are
adjustable by dragging each side with the mouse pointer. Double clicking on the box will bring
up a coordinate entry menu.
The Reset Lockout button removes all lockouts and resets video to full size.
CAUTION: When the MCP-601 is in any of the Squeezed (or split screen) mode, adjusting the
lockout area will automatically switch the video output to the Reset Video (or full screen) mode.

Saving and Recalling Memories Setting -- Magni Premier Config. Tab

To save up to 10 different Memories:
Click on the Config. Tab and make sure the communication port is connected.
Select Save Memories button.
Each of the buttons will store the complete control settings of the Magni Premier software in the
MCP-601 main unit.
Select Shift F1 to recall memory 1 and select Shift F2 for memory 2 and so on.
Factory defaults can be recalled by accessing the Menu from the software or IR remote.
The Factory default memory settings are listed on Table I, MCP-601 Factory Preset Default
Memories.

Saving PowerUp Settings -- Magni Premier Config. Tab

Click on Save PowerUp button to power up to the desired custom settings.
Both the MCP-601 and the Magni Premier software will power up to these settings.
Factory defaults PowerUp setting can be recalled by accessing the Menu from the software or IR
remote. The Factory default PowerUp setting is listed on Table I, MCP-601 Factory Preset
Default Memories.
Note
: Control C will display the Console screen with the status window.
Magni Systems, Inc.
Figure 5-4, Magni Premier Config tab screen
42