MCP-601 Operator's Manual
A. Connector Pin-outs
This chapter identifies and describes the connector pin outs on the MCP-601.
DVI Connector
Pin
Description
1
T.M.D.S. Data2-
2
T.M.D.S. Data2+
3
T.M.D.S. Data2/4 Shield
4
Not used
5
Not used
6
DDC Clock
7
DDC Data
8
No Connect
NOTE:
The actual DVI connector in the instrument is a 29 pin DVI-I combined connector that includes the physical pins
for the digital and analog signals. The MCP-601 only used the DIGITAL portion of the connector. Furthermore,
only one digital channel is being connected. Pins 4,5,12,13,20 and 21 are for the second digital channel.
Magni Systems, Inc.
12. APPENDIX
Pin
Description
9
T.M.D.S. Data1-
10
T.M.D.S. Data1+
11
T.M.D.S. Data1/3 Shield
12
Not used
13
Not used
14
+5V Power
15
Ground (for +5V)
16
Hot Plug Detect
Figure A-1, DVI Connector viewed directly at the rear panel
Pin
17
18
19
20
21
22
23
24
79
Description
T.M.D.S. Data0-
T.M.D.S. Data0+
T.M.D.S. Data0/5 Shield
Not used
Not used
T.M.D.S. Clock Shield
T.M.D.S. Clock+
T.M.D.S. Clock-