Hardware Installation With Magni Premier Application Software And Remote Ir Controller; Software Installation; Magni Premier Application Software; Setting Up Control And Video I/O Configuration - Magni MCP-601 Operator's Manual

MCP-601 Operator's Manual

Hardware Installation with Magni Premier application software and Remote IR Controller

Continue from the procedure under Hardware Installation with Remote IR Controller only
Install the Magni Premier application software per instructions under Software
Installation.
After the software installation, you can operate the MCP-601 from either the IR
Controller or from the Magni Premier application software.

Software Installation

Before installing Magni Premier application software, close all running Windows applications.
The display resolution should be set for 800 x 600 with 16 bits or 24 bits color.
Insert the Magni Premier Installation CD into the CD-ROM drive.
NOTE: Remove any Magni Premier program that has been previously installed by using
Windows software removal utility under My Computer, Control Panel, and
Add/Remove Programs. Also use Windows Explorer to locate the Magni Premier
folder and remove it.

Magni Premier Application Software

If the PC auto-run feature is enabled, the Installation Menu opening screen will appear after the CD
was inserted. Otherwise, from the Desktop:
Select My Computer
Select CD-Rom drive, the Installation folder will appear.
Select Setup.exe to install the Magni Premier program. Then follow the instructions to set up the
program.
NOTE: This MCP-601 operator's manual is also available on the supplied User's CD. Please refer
to the Magni Premier Application Software section in this manual for more information.

Setting up Control and Video I/O Configuration

Run Magni Premier software
Go to the Config tab.
On the Config tab:
Select Analog Video Input and Analog Video Output format
Composite
Component
S-Video (Y/C components in BNC connectors. Optional cable adaptors required for equipment
with S-Video connectors)
NOTE: Only one analog video format should be connected to the analog input and
analog output at a time
avoid signal crosstalk.
Magni Systems, Inc.
All unused connections must be disconnected to
.
24
Factory startup, Composite