Effects Controller; Magnicoder Pro Fx Controller; Control Unit Buttons And Slider Bar - Magni MCP-601 Operator's Manual

MCP-601 Operator's Manual
The FX-1 Controller lets you remotely control the MCP-601's cut, fade/mix, key, freeze, and memory
features. The mix slider provides the convenient way to control the mix level between graphics and
video.
The FX-1 controller unit includes the FX-1 MagniCoder Pro control unit that contains the electronics to
interface with the MCP-601 and the 8-pin phone wire cable.
Connect the FX-1 control unit to the rear of the MCP-601 using the 8-pin phone wire.
FX-1 MagniCoder Pro FX Controller
FX-1 Control Unit Buttons and Slider Bar
The following FX-1 control unit buttons and slider bar controls the overlay of graphics onto video (see
Figure 8.1).
MIX Sets the level of transparency of the graphic onto video. For example, placing the slider bar
completely to the bottom enables full video with no graphics. Consequently, placing the slider bar
completely to the top enables full graphics with no video.
Magni Systems, Inc.
8. FX-1 EFFECTS CONTROLLER
Figure 8.1. FX-1 Control Unit Buttons and Slider Bar
62