Changing Con Guration Settings; Changing Con Guration Settings From The Display - Intermec PB51 User Manual

Options in Extended Test Mode (continued)
Function
Dump Mode
Factory Default
Setup and Exit
Exit

Changing Con guration Settings

There are several ways you can change the con gura tion settings of
the printer. You can change the con guration setti ngs:

Changing Con guration Settings From the Display

You need to enter Setup mode before you can change con guration
settings. For more information on entering Setup mo de and
navigating through the settings, see
on page
The top levels of the Setup menu are organized in a one-way loop.
Each level has several sub-levels.
Note: The ESC/P printer does not have a Setup menu.
PB51 Mobile Label and Receipt Printer User's Guide
Description
This options enters Dump mode. For more
information
"Troubleshooting Communication
Problems" on page 46
This option restores the factory def ault
settings. Press
then follow the instructions on the screen.
This option exits Extended Test mode and
puts the printer in Setup mode.
This option exits Extended Test mode.
from the display.
from the host PC using PrintSet.
from the host PC using the command line.
from the printer home page.
from the SmartSystems Console.
19.
Chapter 2 — Con guring the PB51
on Dump mode, see
.
to select this option and
"Understanding Setup Mode"
23