Replacing The Centre Belt - Husqvarna Rider ProFlex 21 AWD Operator's Manual

16. Fit the belt guide for the centre belt.
17. Hook the spring on the belt tensioner.

Replacing the Centre Belt

On Rider 21 AWD the spring-loaded belt guide under
the blade brake on the centre pulley must be pressed
in to be moved past the centre belt.
1. Remove the rear belt guide for the centre belt.
2. Remove the centre belt and mount a new belt.
3. Fit and adjust the belt guide with the lower belt on
the engine belt pulley.
4. Check and adjust the belt tensioner. This is
especially important when fitting a new belt, since
stretching of the old belt may have been
compensated for by changing the setting of the
belt adjuster.
56
English-
MAINTENANCE
8009-727
8009-637
8009-727
8009-401