Firmware Upgrades - Lab.gruppen PLM series Operation Manual

12. Application Guide
The default configuration is Auto 48 detection, which is appropriate for most professional audio applications.
For further information on the user interface please
refer to the Dolby Lake Controller Manual and the
Sample Rate Converter Clock (SRC Clock)
configuration in section 7.2.1.

12.7 Firmware Upgrades

This chapter describes the process for upgrading firmware in the PLM.
As a responsible manufacturer, Lab.gruppen adopts a policy of continuous product development. As with
all software-based products, it may be desirable from time to time to update the firmware in your PLM
with a more recent version. You can contact your Lab.gruppen dealer or distributor, or visit the Lab.gruppen
website for details on available updates:
www.labgruppen.com/plm
Firmware upgrades are downloadable from the Lab.gruppen website.
PLM firmware upgrade is conducted via the network from the PC running the Lake Controller software.
There are two methods of performing the upgrade: by using the Firmware Update Utility or by using the
Lake Controller software.
96
PLM Series Operation Manual rev 1.1.3
Figure 12.7: Digital clock setup page
the same word clock.
When enabling Dante, the PLM will sync its digital
clock to the Dante master. If using the AES input
in conjunction with having Dante enabled, the
Dante master must have AES signals derived from