Max Output Voltage ('Maxoutvolt'); Max Output Current ('Maxoutcurr'); Serial Number ('Serial No.'); Frame Reset - Lab.gruppen PLM series Operation Manual

Plm series powered loudspeaker management systems
Hide thumbs Also See for PLM series:
Table of Contents

Advertisement

9.13.5.2.3 Max Output Voltage ('MaxOutVolt')

This displays the maximum output voltage that can exist across the PLM's output terminals. (Note this is the
absolute maximum, NOT the voltage defined by the ISVPL setting.)

9.13.5.2.4 Max Output Current ('MaxOutCurr')

This displays the maximum output current that can be delivered by the PLM, summed across all four output
channels.

9.13.5.2.5 Serial Number ('Serial no.')

This displays the PLM's serial number. Note that this is embedded in the PLM, and therefore cannot be
removed or altered if the PLM is stolen.

9.13.5.3 Frame Reset

This option is selected by pressing soft button 4, (Frame Rst) from Menu è Frame.
It is possible to reset all the PLM parameters back to the original factory default values. See section 12.5 for
a full list of these values.
Two levels of reset are provided, 'Soft' and 'Factory'

9.13.5.3.1 Factory Reset

Factory Reset resets all PLM settings and parameters to the original factory-defined default states. This
includes the deletion of any System and Frame Presets stored within the PLM. It also resets the IP settings
for the network ports back to default; a hard power cycle is required to activate this reset.

9.13.5.3.2 Soft Reset

Soft Reset resets PLM settings and parameters to the original factory-defined default values, but does not
alter any Frame Presets or IP settings saved in the PLM.

9.13.5.4 Network

This option is selected by pressing soft button 6, (Network) from Menu è Frame. The Network page gives
information relating to the PLM's network settings. These settings are only alterable from the Lake Control-
ler software.
Menu
PRIM LINK OK
Frame
NO SEC LINK
CTRL ONLINE
Network
IP Addr
IP Mask
169.254.129.24
255.255.0.0
MAC Addr
80:20:8:a6:14:
0
Frame ID
58000010:
fcda7101
Figure 9.13.5.4: Network info
menu view
9. Front Panel Interface
PLM Series Operation Manual rev 1.1.3
65

Advertisement

Table of Contents
loading

This manual is also suitable for:

Plm 10000qPlm 14000

Table of Contents