Meter View 4 - Input View - Lab.gruppen PLM series Operation Manual

9. Front Panel Interface
9.12.4 Meter View 4 – Input View
INPUT METERS
RACK 3:3
OK
INPUT ROUTER 1 INPUT MIXER A
ANALOG 1 (26dBU) 1: ON / 2: OFF
||||||||||||||||||| -09 |||||||||||||||||||
OK OK
INPUT ROUTER 2 INPUT MIXER B
ANALOG 2 (26dBU) 1: ON / 2: OFF
||||||||||||||||||| -09 |||||||||||||||||||
OK OK
COMBINED CHANNEL
STATUS:
Ω VOLTAGE CLIP
Figure 9.12.4: Input meter view
Input meter view provides further input signal information. This view enables inspection of the input signal in
a step before the input mixer and the HOME View input meters.
Frame block:
▸ Line 1 INPUT METERS flag – confirms Input view
▸ Line 2 Frame name – displays the frame name. Default is the PLM model name.
▸
Line 3 (blank)
▸ Frame fault/warning – In the event of a Frame fault or warning, text describing the problem is
Line 4
displayed here.
Input blocks:
▸ Input router – displays which input router used.
Line 1
▸ Line 2 Displays what type of input used for the specific input router. Analog inputs are displayed with
headroom selection and AES/EBU input is displayed with the current sample rate.
▸
Line 3 Input meter showing signal level at the input to the input router. A numeric indication in dB of
the difference between the signal level and input clip level is also provided at the right-hand end of the
meter.
▸ Line 4 Router fault/warning – In the event of a Router fault or warning, text describing the problem is
displayed here.
▸
Button action
9.13.3 for more information.
Block 4
▸ Icon indicates AES/EBU Input termination state. An omega icon indicates input is terminated; no icon
indicates input is unterminated.
▸ Pressing this soft button serves as a shortcut to AES termination selection.
Output blocks:
▸ Line 1 Input mixer name – displays the input mixer name.
▸ Line 2 Displays the input mixer configuration. This can be altered from the Lake Controller. Both 1 and
2 activated (on) indicates that the input to the Lake Processing Module is a mix of the signal from input
router 1 and input router 2.
▸ Line 3 Output meter showing signal level out from the input mixer to the Lake Processing Module. A
54
PLM Series Operation Manual rev 1.1.3
-04
-04
Pressing the soft button serves as a shortcut to the specific input router. See section