Software And Firmware Updates - Lab.gruppen PLM series Quick Start Manual

6. Quick Start Tutorial
Figure 6.3: Lake Controller software installa-
The Lake Controller software is easily installed by inserting the CD in the computer's CD drive and allowing
the auto-setup routine to run. Select INSTALL then Lake Controller software from the installation window
to initiate installation. For most installations, the subsequent suggested default paths can be accepted.
Refer to section 2 of the Lake Controller User Manual for further details on how to install the software and
configure your computer for optimum performance.
Please note that, if pre-existing Lake Controller
presets are present on your PC when you install the
Lake Controller software, choosing a specific
installation path may be preferable. See the Lake
Controller User Manual PLM Addendum for more information.
Once the software is installed, the application can be launched by clicking the desktop icon created during
the install process in the usual way.
Full details of how to use the software application are contained in the documents Dolby Lake Controller
User Manual and Lake Controller User Manual PLM Addendum, both of which are supplied with the PLM. If
these documents are not available, see section 4.2 for download links.

6.3.2 Software and Firmware Updates

Lab.gruppen strive to improve and update the capabilities of PLM Series products. Many of these improve-
ments are available to PLM Series users as free updates of the Lake Controller software application and
PLM Series firmware.
Registered users of PLM Series products will receive timely notification of firmware updates via e-mail. You
also may check for the most recent updates at www.labgruppen.com/index.php/support/software_firm-
ware/. Complete information on firmware updates can be found in section 12.6 of the PLM Series Operation
Manual.
14
PLM Series Quick Start and Field Reference Guide rev 1.0.6
tion screen