Rear Panel Overview - Lab.gruppen PLM series Operation Manual

The brightness of the display and the adjoining network activity LED can be adjusted in the Frame page of
the Main menu.
Encoder
The rotary encoder is used to modify various PLM parameters (e.g. input level) in the leaf nodes of the
menu tree. When a menu item is selected that permits adjustment of parameter values, the ring around the
knob illuminates. While in HOME view the encoder can also be used to scroll through the different meter
views.
Exit
The EXIT key is used primarily while navigating the menu system in MENU mode; pressing it takes the
display back to a previous screen ("up one level" in the menu tree). In METER mode, pressing the EXIT key
always returns the display to the HOME view.

6.2 Rear Panel Overview

5
SPEAKER OUTPUTS
CH 1
CH 2
Ser. N:o
Removed!
SPEAKER OUTPUTS
1+/- CH 1+/- 1+/- CH 1+/- 3+/- CH 3+/-
CLASS 2 WIRING
2+/- CH 2+/- 2+/- CH 2+/- 4+/- CH 4+/-
Ser. N:o
Removed!
1 2 1 2
INPUT 1 LINK 1 INPUT 2 LINK 2
CH 3
CH 4
PIN 1: SCRN 2: POS 3: NEG
I F
ANALOG WITH SO- LOAT TM
CLASS 2 WIRING
INPUT 1 LINK 1 INPUT 2
6
PIN 1: SCRN 2: POS 3: NEG
I F
ANALOG WITH SO- LOAT TM
1+/- CH 3+/-
2+/- CH 4+/-
3 4 7 8
INPUT 1-2 LINK 1-2 ACT PRIM LINK ACT SEC LINK
AES/EBU SWITCHED 10/100 Base-TX
LINK 2 INPUT 1-2 LINK 1-2 ACT PRIM LINK ACT SEC
Figure 6.2a: 4-channel PLM rear panel layout
AES/EBU SWITCHED 10/100 Base-TX
PLM Series Operation Manual rev 1.1.3
6. Quick Guide Overview
9
PLM 0000Q 1
200-240V 2500W
50-60Hz
Must be grounded/earthed
Made in Sweden
LINK
PLM 0000Q 1
200-240V 2500W
50-60Hz
Must be grounded/earthed
Made in Sweden
19