Lab.gruppen PLM series Operation Manual page 105

Technical assistance and service
International
If your Lab.gruppen product requires repair, contact your Lab.gruppen dealer or distributor, or contact Lab.
gruppen by fax or email to obtain the location of the nearest authorized service centre.
Factory service
In the event Lab.gruppen product requires factory service, you may contact Lab.gruppen's service depart-
ment for return instructions and a Return Authorization number.
Please note for product return:
1. Use the original packing.
2. Include a copy of the sales receipt, your name, return address, phone and fax number, email address and
description of the defect.
3. Mark the Return Authorization number on the outside of the packing.
4. Ship the product prepaid to:
Lab.gruppen AB
Faktorvägen 1
SE-434 37 Kungsbacka
SWEDEN
Phone: +46 300 56 28 00
Fax: +46 300 56 28 99
service@labgruppen.com
www.labgruppen.com
Intercooler, Class TD and Lake are national and/or international registered trademarks of Lab.gruppen AB.
PLM, Powered Loudspeaker Management, R.SMPS, LoadLibrary, LoadSmart, SpeakerSafe and ISVPL are
trademarks of Lab.gruppen AB.
Dolby and the double-D symbol are registered trademarks of Dolby Laboratories. Raised Cosine Equaliza-
tion, LimiterMax and Iso-Float are trademarks of Dolby Laboratories. Audinate is a registered trademark of
Audinate Pty Ltd. Dante and Zen are trademarks of Audinate Pty Ltd.
All other trademarks remain the property of their respective owners.
Copyright © 2009 Lab.gruppen AB. All rights reserved.
PLM Series Operation Manual rev 1.1.3
14. Warranty
105