Approvals; Warnings; Explanation Of Graphical Symbols; Warning - Lab.gruppen PLM series Operation Manual

2. Approvals

This equipment conforms to the requirements of the EMC Directive 2004/108/EC and the requirements of the Low
Voltage Directive 2006/95/EC.
Standards applied: EMC Emission EN55103-1, E3
EMC Immunity EN55103-2, E3, with S/N below 1% at normal operation level.
Electrical Safety EN60065, Class I
This equipment is tested and approved according to the U.S. safety standard ANSI/ UL 60065 and Canadian safety
standard CSA C22.2 NO. 60065. ETL made the tests and they are a Nationally Recognized Testing Laboratory
(NRTL).

3. Warnings

3.1 Explanation of Graphical Symbols

The lightning symbol within a triangle is intended to alert the user to the presence of un-insulated "dangerous voltages"
within the unit's chassis that may be of sufficient magnitude to constitute a risk of electric shock to humans.
The exclamation point within a triangle is intended to alert the user to presence of important operating and service instruc-
tions in the literature accompanying the product.

3.1.1 WARNING

To reduce risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Do not expose this system/apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases,
are placed on the apparatus.
L'appareil ne doit pas être exposé à des egouttements d'eau ou des éclaboussures et de plus qu'aucun objet rempli de
liquide tel que des vases ne doit pas être placé sur l'appareil.
This apparatus must be connected to a mains socket outlet with a protective earthing connection.
Cet appareil doi t être raccordé á une prise de courant qui est branchée à la terre.
The mains plug is used as a disconnect device and shall remain readily operable.
Lorsque la prise du réseau d'alimentation est utilisés comme dispositif de déconnexion, ce dispositif doit demeuré
aisément accessible.

3.1.2 CAUTION

To reduce the risk of fire or electric shock, do not remove screws. No user-serviceable parts inside. Refer servicing to
qualified service personnel
PLM Series Operation Manual rev 1.1.3
2. Approvals
7