Keypad Overlay - Intermec CK71 Series Service Work Instructions

TITLE
CK71 Service Work Instructions

Keypad Overlay

OPERATION:
Tools Required
Description
Small straight blade screwdriver or Xacto knife
Isopropyl alcohol solution
Parts Required
Item Part Number
option 355-469-001
355-471-001
Numeric FKEY Overlay Alpha Numeric Overlay
Removal
Using the tip of a small straight bladed screwdriver or other thin edge tool peel back an edge of the overlay from the
top housing. Then grasp that edge with your fingers and remove the overlay the rest of the way.
Installation
1. Select the appropriate replacement overlay.
2. Prior to installing the new overlay ensure that the contact surface area of the top housing is clean and free of any
adhesive residue left over from the overlay that was removed.
3. Remove the adhesive release liner from the new overlay and install the new overlay pressing thoroughly across the
entire area to ensure adequate adhesion.
Description
OVERLAY,GRAPHIC,NUMERIC,FKEY,CK71
OVERLAY,GRAPHIC,ALPHANUMERIC,CK71
Model DOCUMENT NO.
CK71A SWICK71-000
Part Number
PAGE
Page 6 of 42
Qty
1
1