Hardware Configuration; Keyboard (Keypad) Test - Intermec CK60 User Manual

Chapter 4 — Maintaining the CK60 Computer

Hardware Configuration

Keyboard (Keypad) Test

96
Use this test to read the hardware configuration and display it onscreen.
The hardware configuration table shows important information about your
CK60 Computer, such as the serial number, configuration number, model,
software options, and scanner type. Share this information with your Inter-
mec representative when consulting about hardware and software that may
be installed at the factory.
A green check mark indicates a pass; a blue question mark indicates infor-
mation is not available; and a red "X" indicates inaccurate information.
Use this test to test the functionality of all the keys on your installed key-
pad. This test runs continuously until you tap the screen to exit. Note that
I
you do not test key, or you will suspend the CK60 Computer. Press a key on
the keypad for the screen to cover the same key with a block of color -- note
the [8] key was pressed in the following illustration.
Tap screen to exit the keypad test
The [8] key was pressed.
CK60 Series Handheld Computer User's Manual