Table 4.10 Specific Error Codes For Pairevtwait - Hitachi TAGMASTORE MK-90RD011-25 User Manual

Parameter Value
Returned values When the -nowait option is specified:
Normal termination:
When monitoring groups, 1/2/3/4/5 = normal termination for all pairs.
Abnormal termination: other than 0 to 127, refer to the execution logs for error details.
When the -nowaits option is specified:
Normal termination:
When the -nowait and/or -nowaits option is not specified.
When the -nowait and or nowaits option is not specified:
Normal termination: 0. When monitoring groups, 0 = normal termination for all pairs.
Abnormal termination: other than 0 to 127, refer to the execution logs for error details.
Table 4.10 Specific Error Codes for Pairevtwait
Category Error Code
Volume status EX_ENQVOL
EX_INCSTG
EX_INVVOL
EX_EVOLCE
EX_EWSUSE
Unrecoverable
Timer EX_EWSTOT
Recoverable EX_EWSLTO
Note: Unrecoverable errors are fixed and will not be resolved, even after re-executing the
command. If the command failed, the detailed status will be logged in the CCI command log
($HORCC_LOG) (see Table A.2), even if the user script has no error handling.
1: The status is SMPL
2: The status is COPY or RCPY
3: The status is PAIR
4: The status is PSUS
5: The status is PSUE
1: The status is SMPL
2: The status is COPY or RCPY
3: The status is PAIR
4: The status is SSUS ((Note that SVOL_PSUS will be displayed as SSUS)
5: The status is PSUE
Error Message
Unmatched volume status within the
group
Inconsistent status in group
Invalid volume status
Pair Volume combination error
Pair suspended at WAIT state
Timeout waiting for specified status
Timeout waiting for specified status
on the local host
Hitachi Command Control Interface (CCI) User and Reference Guide
Recommended Action
Confirm status using the pairdisplay
command. Make sure all volumes in the
group have the same fence level and
volume attributes.
Confirm pair status using pairdisplay.
Confirm pair status using pairdisplay -l.
Confirm pair status using pairdisplay,
and change combination of volumes.
Issue pairresync manually to the
identified failed paired volume to try to
recover it. If the trouble persists, call the
Hitachi Data Systems Support Center.
Increase timeout value using -t option.
Confirm that CCI (HORCM) on the
remote host is running.
Value
236
229
222
235
234
233
232
189