Hitachi TAGMASTORE MK-90RD011-25 User Manual page 131

Hitachi RAID storage system(s). The Hitachi TagmaStore USP, Hitachi TagmaStore NSC,
Lightning 9900V, and Lightning 9900 storage systems support CCI operations. Hitachi
TrueCopy Synchronous and Asynchronous are supported for all storage system models.
Please contact your Hitachi Data Systems representative for further information on
storage system configurations.
Microcode:
The minimum microcode levels for CCI software version 01-22-03/02 are:
Universal Storage Platform V/VM: 60-03-xx
–
TagmaStore USP/NSC: 50-08-05 (same as for CCI 01-20-03/02)
–
Lightning 9900V: 21-14-28 (same as for CCI 01-20-03/02)
–
Lightning 9900: 01-19-93 (same as for CCI 01-20-03/02)
–
The CCI function for Oracle10g H.A.R.D. requires USP V/VM microcode 60-03-xx or
higher.
The CCI function for command device guarding requires USP/NSC microcode
50-07-30 or higher and 9900V microcode 21-14-24 or higher.
Command Device: The CCI command device must be defined and accessed as a raw
–
device (no file system, no mount operation).
TrueCopy: TrueCopy option must be installed and enabled on the storage systems.
–
Bi-directional swap must be enabled between the primary and secondary volumes.
The port modes (LCP, RCP, RCU target, etc.) and MCU-RCU paths must be defined.
TrueCopy Async: TrueCopy Async option must be installed and enabled.
–
ShadowImage: ShadowImage must be installed and enabled on the storage
–
system(s). Minimum 9900V microcode for Host Group support is 21-06-00.
Database Validator: All USP V/VM and USP/NSC features support Database Validator.
–
The 9900V DB Validator feature (DKC-F460I-8HSF, -8HLF, or -16HSF) must be
installed in the 9900V. Minimum 9900V microcode for DB Validator support is 21-02-
00/00.
Data Retention Utility: The Data Retention Utility feature (Open LDEV Guard on
–
9900V) must be installed and enabled on the storage system(s). Minimum 9900V
microcode for Open LDEV Guard support is 21-06-00.
Universal Replicator: The Universal Replicator feature (USP V/VM, USP/NSC) must
–
be installed and enabled on the storage system. Additionally, the path between the
CUs must be set (using Storage Navigator or SVP), and the bi-directional swap must
be enabled between the primary and secondary volumes.
Copy-on-Write Snapshot: Both ShadowImage and Copy-on-Write Snapshot must be
–
installed and enabled on the storage system(s). Minimum USP/NSC microcode for
Copy-on-Write Snapshot support via CCI is 50-04-05.
Other RAID storage systems: See section 3.1.2 for information on using CCI with
–
Hitachi and other RAID storage systems.
Hitachi Command Control Interface (CCI) User and Reference Guide 113