Raidvchkscan Command; Table 4.31 Raidvchkscan Command Parameters - Hitachi TAGMASTORE MK-90RD011-25 User Manual

4.12.3 Raidvchkscan Command

The raidvchkscan command displays the fibre port of the storage system (9900V and later),
target ID, LDEV mapped for LUN#, and the parameters for validation checking, regardless of
the configuration definition file. Table 4.31 lists and describes the raidvchkscan command
parameters. Figure 4.40 through Figure 4.42 show examples of the raidvchkscan command.
Note: This command will be rejected with EX_ERPERM by connectivity checking between CCI
and the Hitachi RAID storage system.
Table 4.31 Raidvchkscan Command Parameters
Parameter
Command Name
Format
Value
raidvchkscan
raidvchkscan { -h ⎪ -q ⎪ -z ⎪ -p <port> [hgrp] ⎪ -pd[g] <raw_device> ⎪ -s <seq#> ⎪ -t <target> ⎪ -l <lun>
⎪ [ -f[x] ] ⎪ -v <op> }
Hitachi Command Control Interface (CCI) User and Reference Guide 249