Error Reporting; Figure 169. S.m.a.r.t. Error Codes - Hitachi ic35l060avv207-0 - Deskstar 60 GB Hard Drive Specifications

11.42.7 Error reporting

The following table shows the values returned in the Status and Error Registers when specific error con-
ditions are encountered by a device.
A S.M.A.R.T. FUNCTION SET command was received by
the device without the required key being loaded
into the Cylinder High and Cylinder Low registers.
A S.M.A.R.T. FUNCTION SET command was received by
the device with a subcommand value in the Features
Register that is either invalid or not supported by
this device.
A S.M.A.R.T. FUNCTION SET command subcommand other
than SMART ENABLE OPERATIONS was received by the de-
vice while the device was in a "S.M.A.R.T. Disabled"
state.
The device is unable to read its Attribute Values or
Attribute Thresholds data structure.
The device is unable to write to its Attribute
Values data structure.

Figure 169. S.M.A.R.T. Error Codes

Error condition
Deskstar 180GXP hard disk drive specifications
204
Status Error
Register Register
51h 04h
51h 04h
51h 04h
51h 10h or 40h
51h 10h or 01h